Enquiry
Home/Keg couplers

Keg couplers A, S, D, G, M, U and KeyKeg The right coupler for every system.

Keg couplers for A, S, D, G, M, U and KeyKeg, with and without valve, plus special versions to your requirements. Made at the Ruian and Lishui plants. DGUV Test certificates to DIN 6650-5 are available for the A, S, D and G couplers.

Keg coupler for the A systemCA-AG01-AWT · A system keg coupler · original CAD
Range

The right coupler for every system

AKeg coupler CA-AG01-AWT
CA-AG01-AWT · A system · DGUV NV 24815
SKeg coupler CS-MP06-AWT
CS-MP06-AWT · S system · DGUV NV 24814
DKeg coupler CD-NQ01-AWT
CD-NQ01-AWT · D system · DGUV NV 24814
GKeg coupler CG-NQ01-AWT
CG-NQ01-AWT · G system · DGUV NV 24815
MKeg coupler CM-AG01-AWT
CM-AG01-AWT · M system · SGS test report
Configuration

Every system has its own keg coupler

A keg coupler only fits the spear of its own system: A on A, S on S, D on D, G on G, M on M. If you tap kegs with different systems, you need the matching coupler for each system. You can tell the system by the spear: round flange on A and M, triangular flange on G, no flange on S and D.

Within each system we assemble the coupler the way your installation is connected. You choose the CO₂ connection, the beer connection and the valves freely when you order.

FeatureOptions
SystemsA, S, D, G, M, U and KeyKeg
CO₂ connectionBSP male thread 1/2″, 3/4″ or 5/8″ · push-in fitting 8 mm, 10 mm or 3/8″ · hose barb in various industry standards
Beer connectionBSP male thread 1/2″ or 5/8″ · push-in fitting 8 mm, 10 mm or 3/8″ · hose barb in various industry standards
CO₂ check valveDouble lip valve (German style) or single lip valve
Non-return valve (beer line)Stainless steel ball or torpedo
Pressure relief valveoptional, integrated pressure relief valve (PRV)
Special versionsSerial couplers, CO₂ adapter, type A with ball valve, connections to specification

The stainless steel ball or torpedo sits in the beer outlet directly at the coupler. It acts as a non-return valve: beer from the line cannot flow back into the keg.

Standard is BSP male thread. With an additional CO₂ adapter, the CO₂ connection on the coupler itself has a female thread; the adapter is screwed in there and provides a male thread again. In Germany, the double lip valve on the CO₂ connection is the norm.

Construction

How a keg coupler is built

Exploded view of a type A keg coupler, rendered from the original CAD data. When the lever is pushed down, it presses the probe downwards and opens the spear. CO₂ flows into the keg through the side connection, and the beer rises through the down tube and the probe to the beer connection.

Exploded view of an AOBAOSI type A keg coupler with body, lever, probe, seals, CO₂ check valve and stainless steel ball
  1. BodyHolds all the parts and is placed on the spear.
  2. CO₂ connectionThis is where the gas line is connected.
  3. CO₂ check valveLip valve in the CO₂ connection; lets gas through only towards the keg.
  4. Lever with gripWhen pushed down, it presses the probe down and opens the spear.
  5. Split pin with retainerHolds the lever on the body so that it can pivot.
  6. O-ringsSit in grooves in the body and seal the probe. When the seals are changed, they are fitted back into the grooves in the body.
  7. Ball retainerSits at the top of the probe and holds the stainless steel ball so that it cannot fall out.
  8. Stainless steel ballSits inside the probe and acts as a non-return valve in the beer path: beer cannot flow back into the keg. Depending on the version, a torpedo is used instead.
  9. ProbeOpens the valve in the spear and carries the beer upwards.
  10. Beer connectionConnection for the beer line, at the top of the probe.
  11. Coupler seal (CO₂ seal)Sits at the bottom of the body and seals the coupler against the spear. Not to be confused with the CO₂ valve in the spear.

The coupler shown is the CA-AG01-AWT. On systems S, D, G and M the body and probe are shaped differently, but the parts do the same job.

Maintenance

Dismantling a keg coupler and changing the seals

The coupler is taken apart for cleaning or to change the seals. The numbers in brackets refer to the illustration above.

Dismantling

  1. Take the coupler off the keg and unscrew the CO₂ and beer lines.
  2. Pull out the split pin with retainer (5). The lever (4) comes off in one piece and can be put aside.
  3. Push the probe (9) downwards out of the body with light pressure from above.
  4. Take the coupler seal (11) out of the bottom of the body.
  5. Carefully ease the two O-rings (6) out of the grooves in the body with a suitable tool, without damaging the grooves.

The body and probe can now be cleaned and the seals checked.

Reassembly

  1. Fit the O-rings (6) into the grooves in the body.
  2. Push the probe (9) into the body from below.
  3. Fit the lever (4): the lugs in the lever must engage exactly in the grooves on the probe.
  4. Refit the split pin with retainer (5).
  5. Finally, press the coupler seal (11) into the bottom of the body.

On the type A coupler, there is a perforated plate at the bottom of the probe. The coupler seal can hardly be pushed past it. That is why the probe goes in first and the seal last.

Which seal to change when?

Coupler stiff to operate
This is often a sign that the O-rings in the body need changing.
Leak between coupler and spear
Check the coupler seal and change it if necessary.
Models

From our range or built entirely to your specification.

The range for the A, S, D, G and M systems: German style with double lip valve, models with CO₂ adapter and with pressure relief valve. Every image is rendered from the model’s original CAD data and shows the coupler with the lever open.

Keg coupler CA-MP06-AWT
CA-MP06-AWTA system · German style · double lip valve · piston 90°: beer outlet angled 90° for low counters
Keg coupler CA-MG06-AWT
CA-MG06-AWTA system · German style · double lip valve
Keg coupler CA-AG01-AWT
CA-AG01-AWTA system · Connections 5/8″ × 5/8″
Keg coupler CA-BH01-AWT
CA-BH01-AWTA system · Connections 1/2″ × 1/2″
Keg coupler CA-CG04-AWT
CA-CG04-AWTA system · With CO₂ adapter · 5/8″ × 5/8″
Keg coupler Type A with PRV
Type A with PRVA system · With pressure relief valve (PRV) · CO₂ adapter 5/8″ × 5/8″
Keg coupler CA-CH02-AWT
CA-CH02-AWTA system · With CO₂ adapter · 1/2″ × 1/2″
Keg coupler CA-CG05-DWT
CA-CG05-DWTA system · Metal lever handle · CO₂ adapter with John Guest cartridge · beer 1/2″
Keg coupler CA-CG10-DWT
CA-CG10-DWTA system · Metal lever handle · CO₂ adapter with integrated hose tail · beer 1/2″
Keg coupler CS-MP06-AWT
CS-MP06-AWTS system · German style · double lip valve · piston 90°: beer outlet angled 90° for low counters
Keg coupler CS-MG06-AWT
CS-MG06-AWTS system · German style · double lip valve
Keg coupler CS-BH01-AWT
CS-BH01-AWTS system · Connections 1/2″ × 1/2″
Keg coupler CS-AG01-AWT
CS-AG01-AWTS system · Connections 5/8″ × 5/8″
Keg coupler CS-FG04-AWS
CS-FG04-AWSS system · With CO₂ adapter · 5/8″ × 5/8″ · pressure relief valve (PRV)
Keg coupler CS-CG04-AWT
CS-CG04-AWTS system · With CO₂ adapter · 5/8″ × 5/8″
Keg coupler CS-CH05-AWT
CS-CH05-AWTS system · CO₂ adapter with John Guest cartridge · beer 1/2″
Keg coupler CD-FG04-AWS
CD-FG04-AWSD system · With CO₂ adapter · 5/8″ × 5/8″ · pressure relief valve (PRV)
Keg coupler CD-CG04-AWT
CD-CG04-AWTD system · With CO₂ adapter · 5/8″ × 5/8″
Keg coupler CG-BH01-AWT
CG-BH01-AWTG system · Connections 1/2″ × 1/2″
Keg coupler CG-CH02-AWT
CG-CH02-AWTG system · With CO₂ adapter · 1/2″ × 1/2″
Keg coupler CG-FO04-DWS
CG-FO04-DWSG system · For KeyKeg · CO₂ adapter 5/8″ × 5/8″ · pressure relief valve (PRV)
Keg coupler FPQ-GX-07
FPQ-GX-07G system
Keg coupler CM-MG06-AWT
CM-MG06-AWTM system · German style · double lip valve
Keg coupler CM-MP06-AWT
CM-MP06-AWTM system · German style · double lip valve · piston 90°: beer outlet angled 90° for low counters
Keg coupler CM-AG01-AWT
CM-AG01-AWTM system · Connections 5/8″ × 5/8″
Keg coupler CM-CG04-AWT
CM-CG04-AWTM system · With CO₂ adapter · 5/8″ × 5/8″
Keg coupler CM-CH02-AWT
CM-CH02-AWTM system · With CO₂ adapter · 1/2″ × 1/2″
Keg coupler CM-BH01-AWT
CM-BH01-AWTM system · Connections 1/2″ × 1/2″

Pressure relief valve on request: we can fit any coupler with a pressure relief valve (PRV) on request.

Special versions

For special fittings and features

In addition to our standard range, we build keg couplers for other fitting types and with special features: for example the type A with a ball valve on the beer outlet, as is common in France and Belgium, or a coupler for U fittings. We build any coupler you want.

Keg coupler Type A with ball valve
Type A with ball valveA system · Ball valve on the beer outlet · Metal lever handle · Common in France and Belgium
Keg coupler Type U
Type UU system · For U fittings

Metal lever handle with a large print area: on request, we can supply any coupler with this metal lever handle, whose large surface has room for your own brewery name.

Series connection

Serial couplers

Serial couplers are built for connecting kegs in series: several kegs are linked one after the other and dispensed like one large container. We offer serial couplers for all spear types and in a range of configurations.

Keg coupler CA-NQ01-AWT
CA-NQ01-AWTA system · Serial coupler
Keg coupler CS-NQ01-AWT
CS-NQ01-AWTS system · Serial coupler
Keg coupler CD-NQ01-AWT
CD-NQ01-AWTD system · Serial coupler
Keg coupler CG-NQ01-AWT
CG-NQ01-AWTG system · Serial coupler
Keg coupler CM-NQ01-AWT
CM-NQ01-AWTM system · Serial coupler
Connections

Connections to order

All couplers can be delivered with the connections of your choice, in your preferred diameter: hose tails straight or bent, or quick-connect fittings, whether John Guest or another system. Different threads on the CO₂ side and the beer side are possible too, and we can fit either type of handle. We produce all connections in-house. Just tell us briefly what you need. We look forward to your enquiry and to designing your coupler together with you.

Keg coupler, A system, with connections
A system · example with connections
Keg coupler, A system, with connections
A system · example with connections
Keg coupler, S system, with connections
S system · example with connections
Keg coupler, G system, with connections
G system · example with connections
Keg coupler, G system, with connections
G system · example with connections
Keg coupler, G system, with connections
G system · example with connections
Keg coupler, M system, with connections
M system · example with connections

Keg couplers built to your requirements

Do you need a special outlet or a different screw-on hose tail? Get in touch. We adapt the coupler to your requirements.

Send enquiry
Certifications

Tested to DIN 6650-5

The DGUV certificates are valid until 7 July 2029. An SGS test report is available for the M keg coupler.

DGUV Test certificate NV 24815Keg coupler A/G · DIN 6650-5valid until 07.07.2029
DGUV Test certificate NV 24814Keg coupler S/D · DIN 6650-5valid until 07.07.2029
SGS test report, keg couplers A, G, M, S, Dfood contact under Regulation (EC) 1935/200411.06.2024
Enquiry

Which system, what quantity?

Tell us the system, the version with or without valve, and the quantity. We will sort out the rest with you.

Send enquiry
SK certification

SK-tested keg couplers and spears

The SK mark shows that a component for beverage dispensing systems has been tested to DIN 6650-5. The certificates are issued by the Testing and Certification Body for Food and Packaging of DGUV Test. The SK number is on the product: on the flange for flat spears, inside the body for Sankey spears. AOBAOSI is listed in the BGN list of SK certificates 2024.

SK markCertificateProductValid
SK 448-004DGUV Test NV 24815Keg coupler type A and G, with and without valve08.07.2024 – 07.07.2029
SK 448-003DGUV Test NV 24814Keg coupler type S and D, with and without valve08.07.2024 – 07.07.2029
SK 448-005DGUV Test NV 24816Stainless steel flat spear, type A, G and M with safety lock08.07.2024 – 07.07.2029
SK 448-002DGUV Test NV 24813Stainless steel Sankey spear, type S and D with safety lock08.07.2024 – 07.07.2029
Frequently asked questions

Questions about keg couplers

What is a keg coupler?

The keg coupler is placed on the spear and opens its valves: CO₂ flows into the keg and the beer rises through the down tube into the line.

Which types of keg couplers are there?

One for each spear system: A, S, D, G, M and U, plus couplers for KeyKeg. A keg coupler only fits the spear of its own system.

Flat or combi coupler: which one do I need?

The spear in the keg decides. A type A flat spear needs an A coupler, a type M combi spear an M coupler. Both spears have a round flange of Ø 74.5 mm; you recognise type M by the stainless steel valve ball under the CO₂ valve.

Which connections are available on the keg coupler?

For CO₂: BSP male thread 1/2″, 3/4″ or 5/8″, push-in fittings 8 mm, 10 mm or 3/8″ and hose barbs in various industry standards; for beer: BSP male thread 1/2″ or 5/8″, the same push-in fittings and hose barbs. With an additional CO₂ adapter, the CO₂ connection on the coupler itself has a female thread; the adapter is screwed in there and provides a male thread again.

What does the ball or torpedo in the keg coupler do?

Both are non-return valves in the beer line, directly at the coupler. They prevent beer from flowing back from the line into the keg. You choose stainless steel ball or torpedo when ordering.

Which keg coupler fits my keg?

The keg coupler must match the system of the spear: A on A, G on G, M on M, S on S and D on D. You can identify the system from the spear, for example by the round or triangular flange or by the Sankey head without a flange.

The keg coupler leaks or no beer comes out – what is the cause?

First check that the coupler and the spear belong to the same system. Every system has its own coupler; a type A coupler, for example, does not fit a type G spear. If the coupler draws in air or gas escapes, seals or connections are usually leaking: check the coupler seal, the CO₂ check valve and the threaded connections. If the spear itself leaks, the cause is often a damaged or reused body seal or a worn CO₂ valve in the spear. If the beer foams when tapping, the dispensing pressure is often too low, the beer too warm or the keg almost empty. More causes and remedies are on our keg spear troubleshooting page.

How do I change the seals on a keg coupler?

Pull out the split pin with retainer; the lever comes off in one piece. Then push the probe downwards out of the body with light pressure from above, take the coupler seal out of the bottom of the body and ease the two O-rings out of the grooves in the body with a suitable tool. To reassemble, fit the O-rings first, push in the probe, fit the lever so that its lugs engage exactly in the grooves on the probe, and refit the split pin. The coupler seal goes in last, because on type A it can hardly be pushed past the perforated plate at the bottom of the probe. If the coupler is stiff, the O-rings are usually due; if it leaks towards the spear, the coupler seal.

Are AOBAOSI keg couplers SK-tested?

Yes. Type A and G keg couplers are tested under DGUV Test NV 24815 (SK 448-004), type S and D under NV 24814 (SK 448-003), in each case with and without valve to DIN 6650-5, valid until 7 July 2029.

Which versions of keg couplers are available?

Besides the basic models there is the German style with double lip valve, serial couplers for series connection and models with CO₂ adapter and with pressure relief valve (PRV), for all A, S, D, G and M systems. There are also couplers for U fittings and for KeyKeg, as well as the type A with ball valve. Beyond that, we build any coupler to your requirements, connections included.

Does AOBAOSI also supply spears and keg necks to go with them?

Yes. Spear, keg coupler and keg neck come from a single source and are matched to one another.

BrauBeviale 2026, 10–12 November, Nuremberg Exhibition Centre: AOBAOSI in Hall 7A, Stand 558

BrauBeviale 2026 · Hall 7A, Stand 558

Book an appointment